Date of Original Version

12-2012

Type

Article

Rights Management

This is the author’s version of a work that was accepted for publication. Changes resulting from the publishing process, such as peer review, editing, corrections, structural formatting, and other quality control mechanisms may not be reflected in this document. Changes may have been made to this work since it was submitted for publication. A definitive version is available at http://dx.doi.org/10.1016/j.msea.2012.12.074

Abstract or Description

In the integrated oxy-fuel combustion and the turbine power generation system, turbine alloys are exposed to high temperature and an atmosphere comprised of steam, CO2and O2. While surface and internal oxidation of the alloy takes place, the microstructure in the subsurface region also changes due to oxidation that results in the loss of the strengthening precipitates. In an earlier study of the oxidation of Inconel 939 Ni-based superalloy exposed to oxy-fuel combustion environment for up to 1000 h, a high-temperature-oxidation-induced phase transformation in the sub-surface region was noticed and a two-phase region formed at the expense of strengthening γ' phase. While one of the two phases was identified as the Ni-matrix γ solid solution, face-center-cubic) phase, the other product phase remained unidentified. In this study, the crystal structure of the unknown phase and its orientation relationship with the parent Ni-matrix phase was investigated through electron diffraction and high-resolution transmission electron microscopy. It was determined that the crystal structure of the unknown phase could be modeled as a ternary derivative of the ordered η-Ni3Ti phase (D024) structure with lattice parameters of a=.5092 nm and c=.8336 nm, α=90°, β=90° and γ=120°.

DOI

10.1016/j.msea.2012.12.074

Share

COinS
 

Published In

Materials Science and Engineering: A, 566, 134-142.